How to Make a Macramé Samsara Knot Bracelet: Step-by-Step Tutorial
Share
How to Make a Macramé Samsara Knot Bracelet: Step-by-Step Tutorial

Looking for a colorful DIY bracelet that combines traditional knotting techniques with a beautiful woven design?
In this tutorial, we'll show you how to make a Samsara Knot Bracelet, a decorative cord bracelet featuring colorful threads, rotating flat knots, and an adjustable sliding clasp.
This project is perfect for bracelet-making enthusiasts who enjoy learning new macramé techniques and creating handmade accessories. If you love exploring different knotting patterns, browse our DIY Bracelet Tutorials for more creative inspiration.
Beginner Tip: If you're new to this pattern, skim through the photo tutorial first to understand the overall structure. Then follow the steps while watching the full video tutorial. Seeing the complete bracelet before you begin can make the weaving process much easier to follow.
Materials & Tools
Before starting, prepare the following materials. You can explore our Bracelet Making Supplies collection to find cords, beads, charms, and other accessories for your next DIY project:
-
Red No. 72 jade cord, approximately 60 cm long, for the initial loop
-
Five colors of No. 72 jade cord for the main Samsara knot pattern
-
Gold-colored decorative cord for the wrapped sections
-
A contrasting auxiliary thread for forming and tightening the initial loop
-
Bracelet accessories or charms
-
Small beads for decorative bracelet tails
-
Scissors
-
A lighter for carefully sealing synthetic cord ends
-
A bracelet weaving board or clip
-
A ruler
Cord lengths and colors can be adjusted according to your preferred bracelet design and wrist size.
Step 1: Make the Initial Wrapped Loop
Start with a 60 cm piece of red No. 72 jade cord.

Wrap it around your wrist twice to estimate the loop size, then form the initial cord loop.

Add a contrasting auxiliary thread to help tighten the loop later.
Take the three strands of gold-colored decorative cord, pull them down slightly, and fold them back to create a short section approximately 4 cm long.

Hold the folded section firmly and begin wrapping the gold cord upward around the core threads.

After making several wraps, gently push the wrapped section together to keep the coils neat and compact.

Continue wrapping until the section measures approximately 2.7–2.8 cm.
Important: Keep arranging the core threads as you wrap. This helps prevent them from twisting together and makes the finished loop easier to tighten and adjust.
Step 2: Tighten and Finish the Wrapped Loop
Once the wrapping is complete, cut the gold cord.
Pass the cut end through the wrapped section and pull it through from the opposite side.

Use the auxiliary thread to help tighten the loop.

Carefully pull out the auxiliary thread, then continue tightening the gold cord until the cut end is hidden inside the wrapped section.
Trim the remaining gold cord and tidy the red core threads.
Separate the two cord loops to the left and right. Gently stretch and adjust the wrapped section to make the coils even.
Pull the two core cords alternately until they are approximately equal in length.

Place the loop on your bracelet weaving board and tighten it completely.

Your initial wrapped loop is now ready.
Step 3: Make Two Snake Knots
Before beginning the main weaving pattern, make two snake knots beneath the initial loop.
Follow this sequence:
-
Take the lower cord and form a loop toward the back.
-
Wrap the upper cord around your index finger.

-
Pass the upper cord through the loop.

-
Pull the lower cord to tighten the knot.
-
Remove the loop from your index finger.
-
Pull the upper cord to tighten the knot.
-
Tighten both cords evenly.
Repeat the same sequence to make the second snake knot.

Once the two knots are complete, add your chosen bracelet accessories or charms and secure the bracelet back onto the weaving board.
The two remaining core cords will serve as the central axis for the Samsara knot pattern.
Step 4: Attach the Five Colored Cords
Prepare five different colors of No. 72 jade cord.
For each color:
-
Fold the cord in half.
-
Place the folded section beneath the two central core cords.

-
Cross the two working ends.
-
Pass the lower working end around and through the loop on the opposite side.
-
Pull both ends to tighten.
This creates a flat knot attachment around the core cords.
Repeat the same process until all five colored cords are attached to the central axis.
Arrange the colors neatly before beginning the main pattern.
Step 5: Start the Samsara Knot Pattern
The Samsara knot pattern is created by repeatedly weaving flat knots and rotating each completed knot in the same direction.
For the first knot:
-
Take the uppermost working cord on the right and bring it down across the working cords.

-
Take the uppermost working cord on the left and bring it down from the opposite side.
-
Place the right cord over the central axis.
-
Bring the left cord over the right cord and around the axis.
-
Pass it through the loop on the left.
-
Do not tighten the knot immediately.
Rotate the newly formed knot toward the left.

After rotating, tighten the knot firmly and evenly.

This rotation is the key to creating the characteristic twisted appearance of the Samsara knot.
Step 6: Repeat the Rotating Flat Knots
Continue working with the uppermost pair of cords.

For every new knot:
-
Bring the right-side cord down from the top.
-
Bring the left-side cord down from the opposite direction.
-
Form another flat knot around the central axis.
-
Leave the knot slightly loose.
-
Rotate it toward the left.
-
Tighten it firmly against the previous knot.
Repeat the same process for each of the five colors.

Once all five colored cords have been woven through one complete round, begin another round using the same sequence.

Continue until the woven section reaches your desired bracelet length.

Three Tips for a Neat Samsara Knot Bracelet
Always start with the uppermost working cord.
Begin each round with the topmost cord and keep the weaving direction consistent.
Keep the cord directions consistent.
If the right cord comes down from the top, the left cord should follow the opposite direction.
Rotate every flat knot toward the left before tightening.
This is what creates the distinctive spiral effect.
Tighten each knot directly against the previous one to avoid gaps and keep the bracelet pattern compact.
Step 7: Finish the Main Woven Section
Once the bracelet reaches your desired length, remove it from the weaving board.
Straighten the remaining cords and arrange them according to their natural direction.
Prepare the gold-colored decorative cord again.
Fold the three decorative strands back and hold them together. Wrap them around the core cords in the same way as the initial loop.
Continue wrapping for approximately 5–6 mm.

Push the wraps together as you work to create a neat finishing section.
Once complete, locate the two central core cords and cut them.
Carefully seal the cut ends with a lighter if the cord material allows heat sealing.
The main Samsara knot bracelet body is now complete.
Step 8: Add Beads and Decorative Charms
Now it's time to personalize your bracelet.
You can add beads&charms, or other decorative accessories to the remaining cords.
Choose beads with holes large enough to fit your cord.
For this design, a small pendant or decorative charm can be threaded onto the bracelet to create an additional focal point.

You can also experiment with different bead colors and materials to match your preferred style.
Step 9: Make the Adjustable Sliding Clasp
Separate five cords of different colors and set them aside.
From the remaining cords, select the light apricot-colored strands.
Use four cords to make two pairs.
The lower pair will wrap around your thumb, while the upper pair will wrap around your index finger.
Pass the upper pair through the loop formed by the lower pair.
Tighten the lower cords first, remove the loop from your thumb, and then tighten the upper cords.
Repeat the sequence to make a second snake knot.
Once the two snake knots are complete, cut the four working cords and carefully seal the ends.

The bracelet body is now ready for its adjustable clasp.
Step 10: Attach the Sliding Knot Loop
Prepare a separate flat-knot loop.
If you are unfamiliar with making this loop, you can refer to the flat-knot loop tutorial in our bracelet-making collection.
Pull the two new cords to reduce the size of the loop.
Pass the bracelet's tail cords through the loop, fold them back, and thread them through the flat-knot loop.
Pull everything firmly until the sliding clasp is secure.
Trim the core cords close to the knot and carefully seal the ends.
Adjust the connection so that no core cords are visible.
Your adjustable sliding clasp is now complete.

Step 11: Make Decorative Phoenix Tail Knots
The final step is to decorate the bracelet tails.
You can simply thread beads onto the cords, tie a knot, and seal the ends.
For a more decorative finish, try making a Phoenix Tail Knot.
First, thread a bead onto the cord.
Measure approximately 7 cm from the bead and hold this point firmly to form a loop.
Bring the cord upward from behind and pass it through the loop.
Then bring the cord down through the next opening.
After each pass, pull the cord tight and hold the structure in place.
Continue repeating the same weaving sequence, passing the cord upward from behind and then downward through the openings.
Keep going until you have approximately four loops on the upper side and four loops on the lower side.
Hold the knot firmly and pull the lower cord to tighten all the loops.
Adjust the shape carefully, then trim and seal the excess cord.
Your Phoenix Tail Knot is complete.
Repeat the same process for the remaining bracelet tails.
Your Samsara Knot Bracelet Is Finished!
Congratulations! You've completed your handmade Samsara knot bracelet. Explore our Handmade Cord Bracelets collection if you'd like to discover more finished woven bracelet designs.
From the initial wrapped loop to the colorful rotating flat knots, adjustable clasp, and decorative Phoenix Tail Knot, each detail adds character to your finished design.
You can experiment with different cord colors, beads, charms, and decorative finishes to create a bracelet that reflects your own style.
Handmade bracelets are also wonderful gifts for friends and family. If you're looking for something thoughtful and personal, explore our Meaningful Handmade Gifts to discover bracelets designed for special moments.
Want to Follow Along Visually?
For the best learning experience, review the photo tutorial first and then watch the complete video tutorial.
Take your time with the rotating flat knots and clasp construction. Once you understand the repeated movements, the rest of the bracelet becomes much easier to complete.
Happy knotting!
This tutorial is intended for DIY bracelet-making and creative learning. Always use scissors and heat-sealing tools carefully and keep them away from children.